asieps_tobira.book 25 ページ 2009年10月26日 月曜日 午前9時16分
9. Radiator Sub Fan and Fan
Motor
A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Lift-up the vehicle.
4) Remove the under cover.
5) Remove the radiator under cover.
6) Remove the connector (B) of sub fan motor.
7) Remove the ATF hose from the clip of the radia-
tor sub fan motor assembly. (AT model)
8) Lower the vehicle.
9) Remove the air intake duct. <Ref. to IN(H4SO)-
8, REMOVAL, Air Intake Duct.>
10) Remove the bolts which hold the radiator sub
fan shroud to the radiator.
11) Remove the radiator sub fan motor assembly
from underneath the vehicle.
Radiator Sub Fan and Fan Motor
IN-00203
(B)
CO-00275
CO-00101
CO(H4SO)-25
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
C: DISASSEMBLY
1) Remove the clip which holds the fan motor con-
nector to the shroud.
2) Remove the nut which holds fan to fan motor
and shroud assembly.
3) Remove the bolts which hold fan motor onto
shroud.
COOLING
CO-00101
CO-00097
CO-00098