Subaru LEGACY 2006 Manual page 726

asieps_tobira.book 20 ページ ２００９年１０月２６日 月曜日 午前９時１６分
FUEL INJECTION (FUEL SYSTEMS)
5. Crankshaft Position Sensor
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the generator. <Ref. to SC(H4SO)-21,
REMOVAL, Generator.>
3) Remove the bolt which installs crankshaft posi-
tion sensor to cylinder block.
4) Remove the crankshaft position sensor, and
then disconnect the connector from it.
Crankshaft Position Sensor
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
T: 6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
IN-00203
FU-00056
FU-00057
FU(H4SO)-20
T
FU-00058