Timing Belt - Subaru LEGACY 2006 Manual

asieps_tobira.book 10 ページ ２００９年１０月２６日 月曜日 午前９時１６分
LUBRICATION
4. Oil Pump
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Lift-up the vehicle.
3) Remove the under cover.
4) Lower the vehicle.
5) Remove the radiator. <Ref. to CO(H4SO)-19,
REMOVAL, Radiator.>
6) Remove the V-belts. <Ref. to ME(H4SO)-36,
REMOVAL, V-belt.>
7) Remove the belt tensioner.
8) Remove the crankshaft position sensor.
<Ref. to FU(H4SO)-20, REMOVAL, Crankshaft Po-
sition Sensor.>
9) Remove the crank pulley using ST.
ST 499977100 CRANK PULLEY WRENCH
10) Remove the water pump. <Ref. to CO(H4SO)-
14, REMOVAL, Water Pump.>
Oil Pump
11) Remove the timing belt guide. (MT model)
12) Remove the crank sprocket.
IN-00203
13) Remove the bolts which install oil pump onto
cylinder block.
NOTE:
When disassembling and checking the oil pump,
loosen the relief valve plug before removing the oil
pump.
LU-00011
LU-00012
LU(H4SO)-10
LU-00013
LU-00014
LU-00015