Subaru LEGACY 2006 Manual page 944

asieps_tobira.book 39 ページ ２００９年１０月２６日 月曜日 午前９時１６分
7) Connect the Subaru Select Monitor to data link
connector located in the lower portion of the instru-
ment panel (on the driver's side).
CAUTION:
Do not connect any scan tools except Subaru
Select Monitor or general scan tool.
8) Turn the ignition switch to ON (engine OFF) and
Subaru Select Monitor switch to ON.
(A) Power switch
9) On the «Main Menu» display screen, select the
{Each System Check} and press the [YES] key.
10) On the «System Selection Menu» display
screen, select the {Engine Control System} and
press the [YES] key.
11) Press the [YES] key after the information of en-
gine type has been displayed.
12) On the «Engine Diagnosis» display screen, se-
lect the {D Check} and press the [YES] key.
13) When the "Perform D Check?" is shown on the
screen, press the [YES] key.
Inspection Mode
14) Perform subsequent procedures as instructed
on the display screen.
• If trouble still remains in the memory, the corre-
sponding DTC appears on the display screen.
NOTE:
• For detailed operation procedure, refer to the
"SUBARU SELECT MONITOR OPERATION
MANUAL".
• For details concerning DTC, refer to "List of Di-
agnostic Trouble Code (DTC)".
<Ref. to EN(H4SO U5)(diag)-73, List of Diagnos-
tic Trouble Code (DTC).>
• Release the parking brake.
EN-02533
• The speed difference between front and rear
wheels may light the ABS warning light, but this
indicates no malfunctions. When engine control
diagnosis is finished, perform the ABS memory
clearance procedure of self-diagnosis function.
3. GENERAL SCAN TOOL
1) After performing the diagnostics and clearing the
(A)
memory, check for any remaining unresolved trou-
ble data. <Ref. to EN(H4SO U5)(diag)-46, Clear
Memory Mode.>
2) Warm-up the engine.
3) Connect the test mode connector (A) located un-
der the glove box.
EN-00040
4) Connect the general scan tool to data link con-
nector located in the lower portion of the instrument
panel (on the driver's side).
CAUTION:
Do not connect any scan tools except Subaru
Select Monitor or general scan tool.
EN(H4SO U5)(diag)-39
ENGINE (DIAGNOSTICS)
(A)
PI-00201
EN-02533