Subaru LEGACY 2006 Manual page 708

asieps_tobira.book 46 ページ ２００９年１０月２６日 月曜日 午前９時１６分
FUEL INJECTION (FUEL SYSTEMS)
19) Install the pipe protector.
Tightening torque:
T1: 1.0 N·m (0.1 kgf-m, 0.7 ft-lb)
T2: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
T2
20) Install the trunk room trim. (Sedan model)
<Ref. to EI-69, INSTALLATION, Trunk Room
Trim.>
21) Install the rear quarter trim. (Wagon model)
<Ref. to EI-62, INSTALLATION, Rear Quarter
Trim.>
22) Connect connector (A) to the fuel sub level sen-
sor.
23) Connect the quick connector (B) of the fuel de-
livery hose. <Ref. to FU(H4SO)-57, INSTALLA-
TION, Fuel Delivery and Evaporation Lines.>
(A)
24) Install the service hole cover of fuel sub level
sensor.
(A)
(A) Bolt
(B) Grommet
Fuel Tank
T1
FU-02868
(B)
FU-02830
(A)
(B)
FU-01126
FU(H4SO)-46
25) Connect connector (A), and install clip (B).
(B)
26) Connect the connector to the fuel pump.
27) Install the service hole cover of fuel pump.
28) Install the rear seat.
29) Install the fuse of fuel pump to main fuse box.
C: INSPECTION
1) Check that the fuel tank does not have holes,
cracks or is damaged in any way.
2) Make sure that the fuel pipe and fuel hose are
not cracked and that the connections are tight.
(A)
FU-02389
FU-02829
FU-02387