Subaru LEGACY 2006 Manual page 728

asieps_tobira.book 56 ページ ２００９年１０月２６日 月曜日 午前９時１６分
FUEL INJECTION (FUEL SYSTEMS)
29.Fuel Delivery and Evaporation Lines
A: REMOVAL
1) Set the vehicle on a lift.
2) Release the fuel pressure. <Ref. to FU(H4SO)-40, RELEASING OF FUEL PRESSURE, PROCEDURE,
Fuel.>
3) Open the fuel filler flap lid, and remove the fuel filler cap.
4) Remove the floor mat. <Ref. to EI-70, REMOVAL, Floor Mat.>
5) Disconnect the fuel delivery pipes and hoses, and then disconnect the evaporation pipes and hoses.
6) In the engine compartment, disconnect the fuel
delivery hoses, return hoses and evaporation hos-
es.
(1) Disconnect the quick connector on the fuel
delivery line and return line by pushing the ST in
the direction of the arrow.
ST 42099AE000 CONNECTOR REMOVER
(2) Remove the clip and disconnect the evapo-
ration hose from the pipe.
WARNING:
• Be careful not to spill fuel.
• Catch the fuel from hoses using a container
or cloth.
Fuel Delivery and Evaporation Lines
7) Lift-up the vehicle.
8) Remove the fuel tank. <Ref. to FU(H4SO)-41,
REMOVAL, Fuel Tank.>
FU(H4SO)-56
ST
(A) Fuel delivery hose
(B) Evaporation hose
FU-02831
FU-02866