Download Print this page

Subaru LEGACY 2006 Manual page 594

Hide thumbs Also See for LEGACY 2006:

Advertisement

asieps_tobira.book 157 ページ 2009年10月26日 月曜日 午前9時16分
Diagnostic Trouble Code (DTC) Detecting Criteria
Abnormality Judgment
Judge as NG when the malfunction criteria below are met.
Judgment Value
Malfunction Criteria
Integrated times of the condition reach-
ing follows,
DELFLMAX ≥ 0.2 — 0.26 V or SUMFL ≥
16 V
At that time, DELFLMAX: Maximum dif-
ference of sensor output for 12.2 sec-
onds; SUMFL: Integrated value of the
sensor output deviation for 12.2 seconds
The diagnosis counter does not count up when the following conditions are completed within 12.2 seconds.
Maximum value – minimum value of
change of tank pressure during 12.2 sec-
onds
Maximum value – minimum value of bat-
tery voltage during 12.2 seconds
Time Needed for Diagnosis: 12.2 seconds × 4 times
Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cy-
cles.
Normality Judgment
Judge as OK and clear the NG when the malfunction criteria below are met.
Judgment Value
Malfunction Criteria
DELFLMAX
SUMFL
At that time, DELFLMAX: Maximum dif-
ference of sensor output for 12.2 sec-
onds; SUMFL: Integrated value of the
sensor output deviation for 12.2 seconds
5. DTC CLEAR CONDITION
• When the OK idling cycle is completed 40 times in a row
• When "Clear Memory" is performed
6. MALFUNCTION INDICATOR LIGHT CLEAR CONDITION
• When the OK driving cycle is completed 3 times in a row
• When "Clear Memory" is performed
7. FAIL SAFE
None
8. ECM OPERATION AT DTC SETTING
Memorize the freeze frame data. (For test mode $02)
Threshold Value
≥ 4 times
≥ 0.05 kPa (0.375
mmHg, 0.02 inHg)
≥ 1.65 V
Threshold Value
< 0.2 — 0.26 V
< 16 V
GD(H4SO)-157
GENERAL DESCRIPTION

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Legacy 2007