Subaru LEGACY 2006 Manual page 84

asieps_tobira.book 22 ページ ２００９年１０月２６日 月曜日 午前９時１６分
COOLING
7. Radiator Cap
A: INSPECTION
1) Attach the radiator cap to tester.
2) Increase pressure until the tester gauge pointer
stops. Radiator cap is functioning properly if it holds
the service limit pressure for 5 — 6 seconds.
Specified pressure:
93 — 123 kPa (0.95 — 1.25 kg/cm
psi)
Service limit pressure:
2
83 kPa (0.85 kg/cm
CAUTION:
Be sure to remove foreign matter and rust from
the cap in advance. Otherwise, results of pres-
sure test will be incorrect.
Radiator Cap
CO-00044
2
, 14 — 18
, 12 psi)
CO(H4SO)-22