Subaru LEGACY 2006 Manual page 719

asieps_tobira.book 16 ページ ２００９年１０月２６日 月曜日 午前９時１６分
FUEL INJECTION (FUEL SYSTEMS)
16) Disconnect the quick connector that fastens the
fuel injector pipe RH to the fuel pipe.
17) Disconnect the quick connector that fastens the
fuel injector pipe LH to the fuel pipe.
18) Remove the fuel injector pipe RH and LH.
19) Remove the bolts which install fuel pipes on in-
take manifold.
20) Remove the fuel pipe from intake manifold.
21) Remove the intake manifold.
Intake Manifold
D: ASSEMBLY
NOTE:
When assembling the nipple, apply liquid gasket.
Liquid gasket:
THREE BOND 1105 (Part No.004403010)
1) Install the intake manifold.
NOTE:
Use a new gasket.
Tightening torque:
8.75 N·m (0.89 kgf-m, 6.5 ft-lb)
FU-02720
2) Tighten the bolts which install fuel pipes on in-
take manifold.
FU-02721
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
3) Connect the fuel injector pipe LH to the fuel pipe.
FU-02722
NOTE:
Connect the quick connector securely.
FU-01104
FU(H4SO)-16
FU-01104
FU-02722
FU-02721