Subaru LEGACY 2006 Manual page 707

asieps_tobira.book 45 ページ ２００９年１０月２６日 月曜日 午前９時１６分
(3) Tighten the bolts which hold the rear shock
absorber to the rear suspension arm. <Ref. to
RS-10, INSTALLATION, Rear Arm.>
Tightening torque:
62 N·m (6.3 kgf-m, 46 ft-lb)
7) Tighten the bolts holding the parking brake cable
clamp.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
Tightening torque:
32 N·m (3.3 kgf-m, 23.9 ft-lb)
Fuel Tank
8) Connect the connector to the rear ABS wheel
speed sensor.
9) Install the heat shield cover.
10) Install the propeller shaft. <Ref. to DS-11, IN-
STALLATION, Propeller Shaft.>
FU-01132
11) Install the rear exhaust pipe. <Ref. to
EX(H4SO)-8,
Pipe.>
12) Lower the vehicle.
13) Connect the parking brake cable to the parking
brake assembly. <Ref. to PB-7, INSTALLATION,
Parking Brake Assembly (Rear Disc Brake).>
14) Install the rear brake caliper.
15) Tighten the bolts which secure the rear brake
hose mounting bracket.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
FU-02895
16) Install the rear wheels.
17) Lower the vehicle.
18) Connect the quick connector of the evaporation
pipe. <Ref. to FU(H4SO)-57, INSTALLATION, Fuel
Delivery and Evaporation Lines.>
FU-02896
FU(H4SO)-45
FUEL INJECTION (FUEL SYSTEMS)
FU-02894
INSTALLATION, Rear Exhaust
FU-01128
FU-02391