Subaru LEGACY 2006 Manual page 44

asieps_tobira.book 6 ページ ２００９年１０月２６日 月曜日 午前９時１６分
PRE-DELIVERY INSPECTION
4) Press the driver's side power door lock switch to
unlock side. Check that all doors including rear
gate are unlocked.
5) Check that the power door lock switch on the
passenger's side also locks and unlocks.
(A) Lock
(B) Unlock
6) Insert the key to ignition switch, and open the
driver's side door. Press lock on power door lock.
Check that the door is not locked.
6. CHECK THE OPERATION OF CHILD
SAFETY LOCK SYSTEM
1) Set the child safety lock on both rear doors to the
lock position.
2) Close the rear doors completely.
3) Check that the lock levers of the rear doors are in
the unlock position. Then, pull inner remote of rear
doors to ensure that the doors will not open.
(A) Lock
(B) Unlock
Pre-delivery Inspection
PI-00194
(A)
(B)
PI-00247
(A)
(B)
PI-00164
PI-6
4) Pull the outer handles to ensure that doors will
open.
7. OPEN/CLOSE OPERATION CHECKS OF
TRUNK LID
1) Operate the trunk lock release lever to check
that the trunk lid opens normally.
2) Open and close the trunk lid several times for
smooth movement.
3) Lock the trunk lock release lever using main key
or sub key.
4) Check that the trunk lock release lever does not
operate.
5) Check if the trunk lock release lever is not locked
and unlocked using valet key.
8. OPERATION CHECK OF TRUNK LID RE-
LEASE HANDLE
1) Use a flat tip screwdriver. Slide the screwdriver
blade from the slit aperture of the lock assembly ful-
ly to the end until you hear a click. This places the
latch in the locked position.
2) Move the release handle from outside the vehi-
cle in the direction of the arrow to check if the latch
is released.
PI-00258
PI-00248
PI-00249