Subaru LEGACY 2006 Manual page 729

asieps_tobira.book 57 ページ ２００９年１０月２６日 月曜日 午前９時１６分
9) Separate the quick connector of fuel line.
(1) Clean the pipe and connector, if they are
covered with dust.
(2) To prevent from damaging or entering for-
eign matter, wrap the pipes and connectors with
plastic bag etc.
(3) Hold the connector (A) and push the retainer
(B) down.
(4) Pull out the connector (A) from the retainer
(B).
CAUTION:
If the retainer remains in the pipe after removal,
replace the retainer with a new part.
( A )
(A) Connector
(B) Retainer
(C) Pipe
CAUTION:
• Pull the connector to ensure it is connected
securely.
• Make sure the two retainer claws are engaged
in their mating positions in the connector.
• Be sure to inspect hoses and their connec-
tions for any leakage of fuel.
Fuel Delivery and Evaporation Lines
B: INSTALLATION
1) Connect the quick connector on fuel line.
CAUTION:
• If the retainer remains in the pipe after remov-
al, replace the retainer with a new part.
• Make sure there is no damage or dust on the
connections. If necessary, clean seal surface of
pipe.
FU-01333
( B )
( C )
FU-00124
FU(H4SO)-57
FUEL INJECTION (FUEL SYSTEMS)
( A )
(A) Seal surface
(B) Pipe
(1) Set the new retainer (B) to connector (A).
(2) Push the pipe into the connector completely.
( A )
( B )
(A) Connector
(B) Retainer
(C) Pipe
( A )
( B )
(A) Connector
(B) Retainer
(C) Pipe
( B )
FU-00125
( C )
FU-00126
( C )
FU-00127