Subaru LEGACY 2006 Manual page 845

asieps_tobira.book 71 ページ ２００９年１０月２６日 月曜日 午前９時１６分
(6) Install the service hole plug and gasket.
NOTE:
Use a new gasket.
(1)
(1) Piston
(2) Piston pin
(3) Snap ring
(4) Gasket
(7) Place the cylinder block to face the #3 and
#4 cylinder side upward. Following the same
procedures as used for #1 and #2 cylinders, in-
stall the pistons and piston pins.
Cylinder Block
ME-00140
T2
T1
(5)
(3)
(4)
(2)
(5) Service hole plug
(6) Service hole cover
(7) O-ring
ME(H4SO)-71
MECHANICAL
(6)
(7)
(3)
(2)
(1)
Tightening torque: N·m (kgf-m, ft-lb)
T1: 6.4 (0.65, 4.7)
T2: 70 (7.1, 50.6)
ME-02394