Subaru LEGACY 2006 Manual page 710

asieps_tobira.book 25 ページ ２００９年１０月２６日 月曜日 午前９時１６分
Mass Air Flow and Intake Air Temperature Sensor
FUEL INJECTION (FUEL SYSTEMS)
10.Mass Air Flow and Intake Air
Temperature Sensor
A: REMOVAL
1) Disconnect the ground cable from the battery.
IN-00203
2) Disconnect the connectors from the mass air
flow and intake air temperature sensor.
3) Remove the mass air flow and intake air temper-
ature sensor.
FU-01106
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
1.0 N·m (0.10 kgf-m, 0.74 ft-lb)
FU(H4SO)-25