Subaru LEGACY 2006 Manual page 263

asieps_tobira.book 226 ページ ２００９年１０月２６日 月曜日 午前９時１６分
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
ENGINE (DIAGNOSTICS)
BP:DTC P0461 FUEL LEVEL SENSOR "A" CIRCUIT RANGE/PERFORMANCE
DTC DETECTING CONDITION:
• Detected when two consecutive driving cycles with fault occur.
• GENERAL DESCRIPTION <Ref. to GD(H4SO)-149, DTC P0461 FUEL LEVEL SENSOR "A" CIRCUIT
RANGE/PERFORMANCE, Diagnostic Trouble Code (DTC) Detecting Criteria.>
NOTE:
For the diagnostic procedure, refer to DTC P0464. <Ref. to EN(H4SO)(diag)-226, DTC P0464 FUEL LEVEL
SENSOR CIRCUIT INTERMITTENT, Diagnostic Procedure with Diagnostic Trouble Code (DTC).>
BQ:DTC P0462 FUEL LEVEL SENSOR "A" CIRCUIT LOW
DTC DETECTING CONDITION:
• Detected when two consecutive driving cycles with fault occur.
• GENERAL DESCRIPTION <Ref. to GD(H4SO)-151, DTC P0462 FUEL LEVEL SENSOR "A" CIRCUIT
LOW, Diagnostic Trouble Code (DTC) Detecting Criteria.>
NOTE:
For the diagnostic procedure, refer to DTC P0464. <Ref. to EN(H4SO)(diag)-226, DTC P0464 FUEL LEVEL
SENSOR CIRCUIT INTERMITTENT, Diagnostic Procedure with Diagnostic Trouble Code (DTC).>
BR:DTC P0463 FUEL LEVEL SENSOR "A" CIRCUIT HIGH
DTC DETECTING CONDITION:
• Detected when two consecutive driving cycles with fault occur.
• GENERAL DESCRIPTION <Ref. to GD(H4SO)-153, DTC P0463 FUEL LEVEL SENSOR "A" CIRCUIT
HIGH, Diagnostic Trouble Code (DTC) Detecting Criteria.>
NOTE:
For the diagnostic procedure, refer to DTC P0464. <Ref. to EN(H4SO)(diag)-226, DTC P0464 FUEL LEVEL
SENSOR CIRCUIT INTERMITTENT, Diagnostic Procedure with Diagnostic Trouble Code (DTC).>
BS:DTC P0464 FUEL LEVEL SENSOR CIRCUIT INTERMITTENT
DTC DETECTING CONDITION:
• Detected when two consecutive driving cycles with fault occur.
• GENERAL DESCRIPTION <Ref. to GD(H4SO)-155, DTC P0464 FUEL LEVEL SENSOR CIRCUIT IN-
TERMITTENT, Diagnostic Trouble Code (DTC) Detecting Criteria.>
CAUTION:
After repairing or replacing the defective part, perform the Clear Memory Mode <Ref. to EN(H4SO)(di-
ag)-43, OPERATION, Clear Memory Mode.> and Inspection Mode <Ref. to EN(H4SO)(diag)-34, PRO-
CEDURE, Inspection Mode.>.
Step
1 CHECK ANY OTHER DTC ON DISPLAY.
Check
Is DTC P0461, P0462, P0463
or P0464 displayed on the
Subaru Select Monitor?
EN(H4SO)(diag)-226
Yes No
Check the combi- Temporary poor
nation meter. contact occurs.
<Ref. to IDI-9,
CHECK FUEL
LEVEL SENSOR,
INSPECTION,
Combination
Meter System.>