Subaru LEGACY 2006 Manual page 65

asieps_tobira.book 4 ページ ２００９年１０月２６日 月曜日 午前９時１６分
HOW TO USE THIS MANUALS
4. SPECIFICATION
If necessary, specifications are also included.
5. INSPECTION
Inspections to be carried out before and after maintenance are included.
6. MAINTENANCE
• Maintenance instructions for serviceable parts describe work area and detailed step with illustration. It also
describes the use of special tool, tightening torque, caution for each procedure.
• If many serviceable parts are included in one service procedure, appropriate reference is provided for each
parts.
Example:
15.Main Shaft Assembly for Sin-
gle-Range
A: REMOVAL
1) Remove the manual transmission assembly
from vehicie. <Ref. to MT-33, REMOVAL, Manual
Transmission Assembly.>
11) Tighten the lock nuts to the specified torque us-
ing ST1 and ST2.
NOTE:
Secure the lock nuts in two Places after tightening.
ST1 498937000
ST2 499987003
Tightening torque:
118 N m (12.0 kgf-m, 86.8 ft-lb)
(A) Component
(B) Process
(C) Reference
How to Use This Manuals
TRANSMISSION HOLDER
SOCKET WRENCH (35)
(E) (F)
ST1
ST2
(D) Cautions
(E) Tool number of special tool
(F) Name of special tool
HU-4
(A)
(B)
(C)
(D)
(G)
(H)
HU-00020
(G) Tightening torque
(H) Illustration