Subaru LEGACY 2006 Manual page 939

asieps_tobira.book 34 ページ ２００９年１０月２６日 月曜日 午前９時１６分
ENGINE (DIAGNOSTICS)
Remarks
AT fuel cut signal
AT cooperative permission signal
Electronic throttle control motor
relay signal
Clutch switch signal
Stop light switch signal
SET/COAST switch signal
RES/ACC switch signal
Brake switch signal
Main switch signal
Data reception signal
Counter update signal
Cancel switch signal
NOTE:
For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
8. V.I.N. REGISTRATION
1) On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
2) On the «System Selection Menu» display screen, select the {Engine Control System} and press the [YES]
key.
3) Press the [YES] key after the information of engine type has been displayed.
4) On the «Engine Diagnosis» display screen, select the {VIN Registration} and press the [YES] key.
5) Perform the procedure displayed on screen.
NOTE:
For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
Subaru Select Monitor
Display
Fuel Cut Provided or None
Torque Control Permission ON or OFF
ETC Motor Relay ON or OFF
Clutch switch ON or OFF
Stop Light Switch ON or OFF
SET/COAST Switch ON or OFF
RESUME/ACCEL Switch ON or OFF
Brake Switch ON or OFF
Main Switch ON or OFF
Body Int. Unit Data Provided or None
Body Int. Unit Count Provided or None
Cancel Switch ON or OFF
EN(H4SO U5)(diag)-34
Message LED "ON" requirements
When AT fuel cut signal is input.
When AT coordinate permission
signal is input.
When electronic throttle control
motor relay is in function.
When clutch switch is turned to
ON.
When stop light switch is turned
ON.
When SET/COAST switch is
turned to ON.
When RES/ACC switch is turned
to ON.
When brake switch is turned to
ON.
When main switch is turned to
ON.
Data reception signal input
Counter update signal input
When cancel switch is turned to
ON.