Subaru LEGACY 2006 Manual page 111

Hide thumbs Also See for LEGACY 2006:

asieps_tobira.book 2 ページ２００９年１０月２６日　月曜日　午前９時１６分

General Description

EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)

1. General Description

• Wear appropriate work clothing, including a cap,

protective goggles and protective shoes when per-

forming any work.

• Remove contamination including dirt and corro-

sion before removal, installation or disassembly.

• Keep the disassembled parts in order and pro-

tect them from dust and dirt.

• Before removal, installation or disassembly, be

sure to clarify the failure. Avoid unnecessary re-

moval, installation, disassembly and replacement.

• Vehicle components are extremely hot after driv-

ing. Be wary of receiving burns from heated parts.

• Be sure to tighten fasteners including bolts and

nuts to the specified torque.

• Place shop jacks or rigid racks at the specified

• Before disconnecting connectors of sensors or

units, be sure to disconnect the ground cable from

the battery.

Show Quick Links

Chapters