Subaru LEGACY 2006 Manual page 743

asieps_tobira.book 5 ページ ２００９年１０月２６日 月曜日 午前９時１６分
3. Air Cleaner Case
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the air intake duct. <Ref. to IN(H4SO)-
8, REMOVAL, Air Intake Duct.>
3) Disconnect the connector from mass air flow and
intake air temperature sensor.
4) Loosen clamps (A) which connect the air cleaner
case and the intake duct.
5) Remove the clip (B) securing the upper side of
air cleaner case.
(B)
Air Cleaner Case
IN-00203
IN-02079
(A)
IN-02081
IN(H4SO)-5
6) Remove the air cleaner case (rear) and air
cleaner element.
7) Remove the bolts (A) and nut (B) which secure
the air cleaner case to body.
(B)
8) Remove the air cleaner case (front).
INTAKE (INDUCTION)
IN-02192
(A)
IN-00208