Subaru LEGACY 2006 Manual page 701

asieps_tobira.book 31 ページ ２００９年１０月２６日 月曜日 午前９時１６分
Oil Temperature Sensor
FUEL INJECTION (FUEL SYSTEMS)
14.Oil Temperature Sensor
A: REMOVAL
1) Disconnect the ground cable from the battery.
IN-00203
2) Remove the air intake chamber. <Ref. to
IN(H4SO)-7, REMOVAL, Air Intake Chamber.>
3) Remove the engine harness connector from the
bracket.
4) Disconnect the connector from the oil tempera-
ture sensor.
5) Remove the oil temperature sensor.
FU-02733
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
FU(H4SO)-31