Subaru LEGACY 2006 Manual page 437

Hide thumbs Also See for LEGACY 2006:

asieps_tobira.book 10 ページ２００９年１０月２６日　月曜日　午前９時１６分

1) Separate the muffler from rear exhaust pipe.

2) Apply a coat of spray type lubricant to the mating

area of cushion rubber.

3) Remove the front and rear cushion rubbers, and

then remove the muffler.

B: INSTALLATION

Install in the reverse order of removal.

Use a new gasket and self-locking nut.

Tightening torque:

48 N·m (4.9 kgf-m, 35.4 ft-lb)

C: INSPECTION

1) Check the connections and welds for exhaust

2) Make sure there are no holes or rusting.

3) Check the cushion rubber for wear or crack.

Show Quick Links

Chapters