Subaru LEGACY 2006 Manual page 10

asieps_tobira.book 5 ページ ２００９年１０月２６日 月曜日 午前９時１６分
8. TIE-DOWNS
Tie-downs are used when transporting vehicles and when using the chassis dynamo. Attach tie-down only
to the specified locations on the vehicle.
• Tie-down location
CAUTION:
Use the T-hook for rear tie-down. Do not use the hook other than T-hook, otherwise it can be removed
when transporting vehicles
(1)
(1) Hook for tie-down
• CHAIN DIRECTION AT TIE-DOWN CONDITION
NOTE:
Pull the chains LH and RH in the same direction, but front and rear side in the counter direction. Pull all the
chains in a same moment.
Note
(1)
NT-00117
NT-5
NOTE
(1)
NT-00149