Subaru LEGACY 2006 Manual page 684

asieps_tobira.book 19 ページ ２００９年１０月２６日 月曜日 午前９時１６分
Engine Coolant Temperature Sensor
FUEL INJECTION (FUEL SYSTEMS)
4. Engine Coolant Temperature
Sensor
A: REMOVAL
1) Disconnect the ground cable from the battery.
IN-00203
2) Remove the generator. <Ref. to SC(H4SO)-21,
REMOVAL, Generator.>
3) Disconnect the connectors from the engine cool-
ant temperature sensor.
FU-00055
4) Remove the engine coolant temperature sensor.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Use a new gasket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
FU(H4SO)-19