Subaru LEGACY 2006 Manual page 805

asieps_tobira.book 33 ページ ２００９年１０月２６日 月曜日 午前９時１６分
Engine Assembly
MECHANICAL
27) Fill engine coolant.
<Ref. to CO(H4SO)-12, FILLING OF ENGINE
COOLANT, REPLACEMENT, Engine Coolant.>
28) Check the ATF level and replenish it if neces-
sary.
<Ref. to 4AT-26, INSPECTION, Automatic Trans-
mission Fluid.>
29) Charge the A/C system with refrigerant. <Ref.
to AC-20, PROCEDURE, Refrigerant Charging
Procedure.>
30) Remove the front hood stay, and close the front
hood.
31) Lower the vehicle from the lift.
C: INSPECTION
1) Check that pipes, hoses, connectors and clamps
are installed firmly.
2) Check the engine coolant and ATF are at speci-
fied levels.
3) Start the engine and check for exhaust gas, en-
gine coolant, leaks of fuel, etc. Also check for noise
and vibrations.
ME(H4SO)-33