Subaru LEGACY 2006 Manual page 863

asieps_tobira.book 35 ページ ２００９年１０月２６日 月曜日 午前９時１６分
11.Preparation for Overhaul
A: PROCEDURE
1) After removing the engine from body, secure it to
ST in the following procedure.
ST1 498457000 ENGINE STAND ADAPTER
RH
ST2 498457100 ENGINE STAND ADAPTER
LH
ST3 499817100 ENGINE STAND
ST3
2) In this section the procedures described under
each index are all connected and stated in order.
The procedure for overhauling of the engine will be
completed when you go through all steps in the
process.
Therefore, in this section, to conduct the particular
procedure within the flow of a section, you need to
go back and conduct the procedure described pre-
viously in order to do that particular procedure.
Preparation for Overhaul
ST1
ST2
ME-00221
ME(H4SO)-35
MECHANICAL