Subaru LEGACY 2006 Manual page 733

asieps_tobira.book 21 ページ ２００９年１０月２６日 月曜日 午前９時１６分
6. Camshaft Position Sensor
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Disconnect the connector from camshaft posi-
tion sensor.
3) Remove the bolt which installs camshaft position
sensor to support.
4) Remove the bolt which installs camshaft position
sensor support to camshaft cap LH.
5) Remove the camshaft position sensor and the
support as a unit.
Camshaft Position Sensor
6) Remove the camshaft position sensor from the
support.
B: INSTALLATION
IN-00203
Install in the reverse order of removal.
Tightening torque:
Camshaft position sensor support
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
Camshaft position sensor
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
FU-02714
FU-02724
FU-02725
FU(H4SO)-21
FUEL INJECTION (FUEL SYSTEMS)
FU-00179