Subaru LEGACY 2006 Manual page 720

asieps_tobira.book 17 ページ ２００９年１０月２６日 月曜日 午前９時１６分
4) Connect the fuel injector pipe RH to the fuel
pipe.
NOTE:
Connect the quick connector securely.
5) Install the fuel injector.
6) Tighten the bolts which install injector pipe on in-
take manifold.
• RH side
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
• LH side
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
Intake Manifold
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
7) Install the engine harness onto the intake mani-
fold.
FU-02720
8) Tighten the bolts which install engine harness on
intake manifold.
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
9) Hold the engine harness using the harness band
clips.
FU-02717
10) Install the purge control solenoid valve. <Ref.
to EC(H4SO)-6, INSTALLATION, Purge Control
Solenoid Valve.>
FU-02718
11) Connect the connectors (A) to fuel injector.
FU(H4SO)-17
FUEL INJECTION (FUEL SYSTEMS)
FU-02719
FU-01097
FU-02329