Subaru LEGACY 2006 Manual page 858

asieps_tobira.book 51 ページ ２００９年１０月２６日 月曜日 午前９時１６分
B: INSTALLATION
1) Apply a thin coat of engine oil to camshaft jour-
nals, and install the camshaft.
2) Install the camshaft cap.
(1) Apply liquid gasket to the mating surfaces of
camshaft cap.
Liquid gasket:
THREE BOND 1280B (Part No. K0877YA018)
NOTE:
• Apply a coat of liquid gasket of 3 mm (0.12 in) in
diameter (A) along the edge (B) of camshaft cap
(C) mating surface.
• Install within 20 min. after applying liquid gasket.
(A)
(B)
(2) Temporarily tighten the bolts (a) through (d)
in alphabetical sequence.
(c)
(d)
(3) Install the valve rocker assembly.
<Ref. to ME(H4SO)-48, INSTALLATION, Valve
Rocker Assembly.>
Camshaft
ST 499497000
Tightening torque:
ME-02710
Tightening torque:
(C)
NOTE:
ME-00265
Use a new seal washer.
Tightening torque:
(a)
(b)
ME-02711
ME(H4SO)-51
®
(4) Tighten the TORX bolts (e) through (j) in al-
phabetical sequence using the ST.
®
TORX PLUS
18 N·m (1.8 kgf-m, 13.0 ft-lb)
(e)
(g)
(j)
(f)
(5) Tighten the bolts (k) through (r) in alphabet-
ical sequence.
9.75 N·m (1.0 kgf-m, 7.2 ft-lb)
(k)
(q)
(r)
(n)
(6) Tighten the bolts (s) and (t) in alphabetical
sequence.
9.75 N·m (1.0 kgf-m, 7.2 ft-lb)
(s)
(t)
MECHANICAL
(i)
(h)
ME-02712
(m)
(o)
(p)
(l)
ME-02713
ME-02714