Subaru LEGACY 2006 Manual page 717

asieps_tobira.book 14 ページ ２００９年１０月２６日 月曜日 午前９時１６分
FUEL INJECTION (FUEL SYSTEMS)
11) Connect the engine harness connectors (B) to
bulkhead harness connectors.
(B)
12) Connect the brake booster hose (A).
13) Connect the engine coolant hoses (A) to throt-
tle body.
(A)
14) Connect the spark plug cords to spark plugs.
15) Install the generator. <Ref. to SC(H4SO)-21,
INSTALLATION, Generator.>
16) Install the air intake duct, air cleaner case and
air intake chamber. <Ref. to IN(H4SO)-8, INSTAL-
LATION, Air Intake Duct.> <Ref. to IN(H4SO)-6,
INSTALLATION, Air Cleaner Case.> <Ref. to
IN(H4SO)-7, INSTALLATION, Air Intake Cham-
ber.>
17) Install the fuse of fuel pump relay to the main
fuse box.
Intake Manifold
18) Connect the battery ground cable to the bat-
tery.
(A)
FU-02712
C: DISASSEMBLY
1) Disconnect the engine ground terminal from in-
take manifold.
(A)
FU-02320
2) Remove the ignition coil and ignitor assembly.
<Ref. to IG(H4SO)-7, REMOVAL, Ignition Coil and
Ignitor Assembly.>
3) Remove the throttle body. <Ref. to FU(H4SO)-
10, REMOVAL, Throttle Body.>
4) Remove the EGR valve. <Ref. to FU(H4SO)-26,
REMOVAL, EGR Valve.>
5) Remove the PCV pipe.
(A)
FU-01085
FU(H4SO)-14
IN-00203
FU-01090
FU-01091