Subaru LEGACY 2006 Manual page 723

asieps_tobira.book 27 ページ ２００９年１０月２６日 月曜日 午前９時１６分
12.Fuel Injector
A: REMOVAL
1. RH SIDE
1) Release the fuel pressure.
<Ref. to FU(H4SO)-40, RELEASING OF FUEL
PRESSURE, PROCEDURE, Fuel.>
2) Disconnect the ground cable from the battery.
3) Open the fuel filler flap lid, and remove the fuel
filler cap.
4) Remove the air intake duct and air cleaner case.
<Ref. to IN(H4SO)-8, REMOVAL, Air Intake Duct.>
<Ref. to IN(H4SO)-5, REMOVAL, Air Cleaner
Case.>
5) Remove the spark plug cords from spark plugs
(#1 and #3 cylinders).
6) Remove the fuel pipe protector RH.
7) Disconnect the connectors (A) from fuel injector.
8) Remove the harness band (B) which holds the
engine harness to injector pipe.
(B)
Fuel Injector
IN-00203
FU-02326
(A)
FU-02730
FU(H4SO)-27
FUEL INJECTION (FUEL SYSTEMS)
9) Remove the bolt which holds fuel injector pipe
onto intake manifold.
10) Remove the fuel injector while lifting up the fuel
injector pipe.
2. LH SIDE
1) Release the fuel pressure.
<Ref. to FU(H4SO)-40, RELEASING OF FUEL
PRESSURE, PROCEDURE, Fuel.>
2) Remove the battery. <Ref. to SC(H4SO)-27,
REMOVAL, Battery.>
3) Open the fuel filler flap lid, and remove the fuel
filler cap.
4) Remove the spark plug cords from spark plugs
(#2 and #4 cylinders).
5) Remove the fuel pipe protector LH.
6) Disconnect the connectors (A) from fuel injector.
7) Remove the harness band (B) which holds the
engine harness to injector pipe.
(A)
FU-02717
FU-02325
(B)
FU-02729