Subaru LEGACY 2006 Manual page 703

asieps_tobira.book 41 ページ ２００９年１０月２６日 月曜日 午前９時１６分
22.Fuel Tank
A: REMOVAL
WARNING:
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel.
1) Set the vehicle on a lift.
2) Release the fuel pressure. <Ref. to FU(H4SO)-
40, RELEASING OF FUEL PRESSURE, PROCE-
DURE, Fuel.>
3) Drain fuel from fuel tank.
<Ref. to FU(H4SO)-40, DRAINING FUEL, PRO-
CEDURE, Fuel.>
4) Remove the rear seat.
5) Remove the service hole cover of fuel pump.
6) Disconnect the connector from fuel pump.
7) Remove the connector (A) and clip (B).
Fuel Tank
FU-02387
FU-02829
(B)
(A)
FU-02389
FU(H4SO)-41
FUEL INJECTION (FUEL SYSTEMS)
8) Remove the service hole cover of fuel sub level
sensor.
(1) Remove bolt (A).
(2) Push the grommet (B) down and remove the
service hole cover.
(A)
9) Disconnect connector (A) from fuel sub level
sensor.
10) Disconnect the quick connector on the fuel de-
livery hose (B).<Ref. to FU(H4SO)-56, REMOVAL,
Fuel Delivery and Evaporation Lines.>
(A)
11) Remove the trunk room trim. (Sedan model)
<Ref. to EI-68, REMOVAL, Trunk Room Trim.>
12) Remove the rear quarter trim. (Wagon model)
<Ref. to EI-61, WAGON MODEL, REMOVAL, Rear
Quarter Trim.>
13) Remove the pipe protector.
(A)
(B)
FU-01126
(B)
FU-02830
FU-02390