Front Fender Components
1. Front fender lining
2. Front fender
Front Fender Removal and Installation
Removal
1) Remove splash guard (if equipped) referring to "Splash Guard Removal and Installation (If Equipped) in Section
9M".
2) Remove front fender lining.
3) Remove front bumper referring to "Front Bumper Components in Section 9K".
4) Remove headlight assembly referring to "Headlight Housing Removal and Installation in Section 9B".
5) Remove cowl top garnishes referring to "Cowl Top Components in Section 9K"
6) Disconnect connector from side turn signal lamp.
7) Remove front fender.
Installation
Reverse removal procedure to install front fender noting the following instruction.
• If paint on fender bolt is peeled off, be sure to apply paint again.
• Adjust panel clearance referring to "Panel Clearance in Section 9K".
3
1
3. Front fender rear pad
4. Splash guard (if equipped)
Hood / Fenders / Doors:
S6JB0A9A06003
2
4
I5JB0A9A0004-02
S6JB0A9A06004
9J-2