Required Service Material - Suzuki Ignis Service Manual

Recommended SUZUKI product
Material
Sealant Sealant 1207C
(99000-31150)
Sealant 1207B
(99000-31140)
Sealant 1215
(99000-31110)
9) Install flywheel (drive plate for A/T).
Using special tool, lock flywheel or drive plate, and tighten
flywheel or drive plate bolts applied with sealant to specifica-
tion.
"A" : Sealant 99000-31110
Special tool
(A) : 09924-17810
Tightening torque
Flywheel or drive plate bolts
(a) : 70 N·m (7.0 kg-m, 51.0 lb-ft)
10) Install the following parts to engine as previously outlined.
• Piston and connecting rod
• Cylinder head assembly
• Camshaft, tappet and shim
• Timing chain guide, chain tensioner adjuster, chain ten-
sioner, timing chain and crankshaft timing sprocket
• Timing chain cover
• Cylinder head cover
• Intake manifold and exhaust manifold
• Oil pan and oil pump strainer
11) Install clutch to flywheel (vehicle with M/T) referring to Sec-
tion 7C.
12) Install engine assembly to vehicle as previously outlined.

REQUIRED SERVICE MATERIAL

(Part Number)
ENGINE MECHANICAL (M13 ENGINE) 6A1-85
• To apply to mating surfaces of cylinder block and oil
pan.
• To apply to mating surfaces of cylinder block and
timing chain cover.
• To apply to sealing surfaces of cylinder head cover.
• To apply to mating surfaces to rear oil seal housing.
• To apply to mating surface of cylinder block, cylin-
der head and timing chain cover.
• To apply to the thread of the bolt of water outlet
pipe.
• To flywheel (M/T) or drive plate (A/T) bolts.
Use