Alarm-Pt (Alarm Port) - Avaya S8700 Maintenance Manual

Maintenance-Object Repair Procedures

ALARM-PT (ALARM PORT)

MO's Name (in
Alarm Log)
ALARM-PT
ALARM-PT
1. UU is the universal cabinet number (1–64 for ATM PNC, 1–44 for CSS PNC). C is the carrier
designation (A, B, C, D, or E). SS is the number of the slot where the circuit pack resides (01–21).
pp is the 2-digit port number (01, 02,...).
The Alarm port MO provides on-board maintenance for an analog line port that is
administered as an external device alarm port. Tests are provided to verify the
analog line ports ability to detect an external device alarm. The external device
alarm (EXT-DEV) MO is used for the off-board external device alarm.
Error Log Entries and Test to Clear Values
Table 8-16. 8-Port Analog Line Error Log Entries
Error Aux
Type Data
1
0 0
15 (a) Any
18 0
130 (b)
769
1. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate
test's description, and follow its recommended procedures.
Notes:
a. This is a software audit error that does not indicate any hardware
malfunction. Run the short test sequence, and investigate errors.
b. Indicates that the circuit pack has been removed or has been insane for
more than 11 minutes. To clear the error, reseat or replace the circuit pack.
8-42 Issue 1 May 2002
Alarm
Level Initial Command to Run
MINOR test port UUCSSpp l
WARNING test port UUCSSpp sh
Alarm
Associated Test Level
Any Any
Audits and
Updates test
(#36)
busyout WARNING
station
extension
None WARNING
Battery Feed MINIOR
test (#35)
1
Full Name of MO
Alarm-Port
Alarm-Port
On/Off
Board Test to Clear Value
Any test port UUCSSpp sh r 1
OFF release station extension
ON test port UUCSSpp sh
ON test port UUCSSpp sh r 2
555-233-143