Avaya Definity SI Maintenance Manual page 335

display events
Table 8-2. Denied IP events
Event Event
Type Description
1907 IP RRJ-Invalid
RAS addr
1908 IP RRJ-Invld call
SigAddr
1909 IP RRJ-RemoteOfc
misadmin
1910 IP RRJ-H323
UserObj undef
1911 IP RRJ-Exceed
max endpts
1912 IP RRJ-Exceed
ProdID/Ver
1913 IP RRJ-Invalid
ProdID/Ver
555-233-123
Explanation
Registration Rejected because the
RAS address in the RRQ is invalid.
IP Registration Rejection because
signalling address in the RRQ is
invalid.
Registration rejected because:
1. Remote Office is enabled on
the Signaling Group screen,
but the RRQ is not from a
supported Remote Office
product.
2. The RRQ is from a supported
Remote Office product, but
Remote Office not enabled on
the Signaling Group screen.
3. Remote Office is enabled on
the Signaling Group screen,
but the Terminal Type in the
RRQ is not valid.
Registration rejected because there is
no H323 User Object.
Registration rejected because the
capacity for either registered
endpoints or Remote Office endpoints
is exceeded. Check maximum
allowed in the system on page 1 of
the System Parameters Customer
Options screen.
Registration rejected because the
maximum number of registered
endpoints of a specific product ID and
version is exceeded. Check the limit
on the System Parameters Customer
Options screen.
Registration rejected because invalid
Product ID / Version. Registering
Application's product ID is not
administered or no Product ID in RRQ
message.
Event Event
Data 1 Data 2
0 IP address
that sent the
RRQ
0 IP address
0 IP address
0 IP address
0 1st part: # of
RO stations;
2nd part: # of
IP stations,
respectively.
T/S: IP 1st part:
Product from registered
the System limit; 2nd part:
Parameters actual count,
Customer respectively.
Options
screen
T/S: Product Major version
ID of the number
registering
application
Continued on next page
Issue 4 May 2002 8-85