Protective Housings Against Laser Exposure; Classification; Protective Housing Of The Machine - FujiFilm PROFECT CS Service Manual

3. Protective Housings Against Laser
Exposure
Even when the protective housings are removed for servicing, laser beams will never
leak out from the machine unless the optical path is intentionally changed. However, if
the optical path is changed inadvertently during optics-related procedures, the service
engineer or other people around the machine may be possibly exposed to laser
radiation.
During optics-related procedures, carefully perform the procedures while checking the
instructions described in this manual, and after the procedures are completed, restore
the protective housings removed back exactly where they were.
 Protective Housing of the Machine
The removable protective housings of the machine are illustrated below. The four
covers marked by in the illustration below are protective housings against laser

exposure.
011-202-09E
10.24.2011 FM5964
4.

CLASSIFICATION

1. According to the type of protection against electrical shock
CLASS 1 EQUIPMENT
2. According to the degree of protection against electrical shock
NO APPLIED PART
3. Protection against harmful ingress of water or particulate matter
IP00
4. According to the degree of safety of application in the presence
of a flammable anesthetics mixture with air or with oxygen or
nitrous oxide.
Equipment not suitable for use in the presence of a flammable anesthetics mixture
with air or with oxygen or nitrous oxide.
5. According to the mode of operation
CONTINUOUS OPERATION
CR-IR 363 Service Manual
14
Safety Precaution-
14
Safety Precaution-