Table of Contents
Advertisement
Configuration Using the Web Interface
Topology Discovery (LLDP)
The ES7506 supports topology discovery or LLDP (IEEE 802.1AB Link Layer Discovery Protocol)
functionality that can help to discovery multi-vendor's network devices on the same segment by a network
monitoring system (NMS) that supports LLDP functionality.
With LLDP functionality, NMS can easily maintain the topology map, display port ID, port description,
system description, and VLAN ID. Once a link failure occurs, the topology changes the events that can be
updated to the NMS as well. The LLDP Port State can display the neighbor ID and IP learnt from the
connected devices.
Topology Discovery Page
LLDP
LLDP Configuration
LLDP timer
LLDP hold time
LLDP Port State
Local Port
Neighbor ID
Neighbor IP
Neighbor VID
Apply
90 - Topology Discovery (LLDP)
Select Enable/Disable to enable/disable LLDP function.
This is the interval time of each LLDP in seconds; valid values
are from 5 to 254. The default is seconds.
The Time to Live (TTL) timer. The LLDP state expires when the
LLDP is not received by the hold time. The default is 120
seconds. and the range is from 10 to 255.
The current port number that linked with network device.
The MAC address of the peer device on the same network
segment.
The IP address of the peer device on the same network segment.
The VLAN ID of the peer device on the same network segment.
Click Apply to apply the settings.
Note: You must Save the settings
maintain these settings if the ES7506 is powered off.
(Page
93), if you want to
RocketLinx ES7506 User Guide: 2000529 Rev. F
Advertisement
Table of Contents
