Configuration Using The Web Interface; Web Interface - Comtrol ES7506 User Manual

Industrial rack mount managed poe switch; 4 - poe ports 2 - 10/100base-tx ports
Hide thumbs Also See for ES7506:
Table of Contents

Advertisement

Configuration Using the Web Interface

The RocketLinx ES7506 provides both in-band and out-band configuration methods:
Out-band management means that you configure the RocketLinx ES7506 using the RS-232 console cable and the
Command Line Interface (CLI) to access the RocketLinx ES7506 without attaching an admin PC to the network. You can
also use out-band management, if you lose the network connection to the RocketLinx ES7506.
In-band management means that you connect remotely using the RocketLinx ES7506 IP address through the network. You
can remotely connect with the RocketLinx ES7506 embedded Java applet web interface or a Telnet console and the CLI.
If you are planning on using in-band management, you need to program the RocketLinx ES7506 IP address to meet your
network requirements. The easiest way to configure the IP address is using a Windows system and NetVision, which is
discussed in
Initial Configuration Using NetVision
The CLI and Telnet are discussed in
The RocketLinx ES7506 provides HTTP web interface and secured HTTPS web interface (Page 19) for web management.

Web Interface

The RocketLinx ES7506 web management page was developed with Java. It allows you to use any standard web browser,
which is compatible with Java Runtime to configure and communicate with the RocketLinx ES7506 from anywhere on the
network.
If you did not program the IP address for your network using NetVision
need to change your computer IP address to 192.168.250.x (Network Mask: 255.255.0.0). The default IP address for the
RocketLinx ES7506 is 192.168.250.250.
1.
Open a command prompt window and ping the IP address for the RocketLinx ES7506 to verify a normal response time.
2.
Launch the web browser (Internet Explorer or Mozilla Firefox) on the PC.
3.
Type http://192.168.250.250 (or the IP address of the switch).and then press Enter.
4.
Click Run if a security warning popup message appears.
5.
Enter in user name, the password, and click OK. The default
user name and password are both admin.
Configuration Using the Web Interface
on Page 11.
Configuration Using the Command Line Interface (CLI)
on Page 21.
(Programming Network Information
RocketLinx ES7506 User Guide: 2000529 Rev. E - 17
on Page 14), you

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rocketlinx es7506

Table of Contents