Qos Setting - Comtrol RocketLinx ES7528 User Manual

QoS Setting

Use this subsection to set up QoS settings for the RocketLinx ES7528.
QoS Setting
Queue Scheduling
Use a Round The Round Robin scheme means all the priority has the same privilege, the traffic is forward cyclic
Robin scheme from highest to lowest.
Use a strict Packets with higher priority in the queue are always processed first, except that there is no packet with
priority scheme higher priority.
Use Weighted This scheme allows you to assign new weight ratio for each class. The 10 is the highest ratio. The ratio
Round Robin of each class is:
scheme
Wx / W0 + W1 + W2 + W3 + W4 + W5 + W6 + W7 (Total volume of Queue 0-7)
Port Setting
Priority Indicates the default port priority value for untagged or priority-tagged frames. When the RocketLinx
ES7528 receives the frames, the RocketLinx ES7528 attaches the value to the CoS field of the
incoming VLAN-tagged packets. You can enable 0,1,2,3,4,5,6 or 7 to the port.
Default priority type is COS. The system provides default COS-Queue table to which you can refer for
the next command.
Apply Click Apply to apply the settings.
Note: You must Save the settings (Page 137), if you want to maintain these settings if the RocketLinx
QoS Setting
ES7528 is powered off.
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 89
Description
QoS Setting