Assign A Default Route For An Asbr - Motorola BSR 2000 Configuration And Management Manual

BSR 2000 Configuration and Management Guide
Example
The following example establishes a virtual link with default values for all optional
parameters:
The following example establishes a virtual link with MD5 authentication:

Assign a Default Route for an ASBR

Once routes are redistributed into an OSPF routing domain, the router becomes an
Autonomous System Border Router (ASBR) that must be manually forced to generate
a default route into the OSPF routing domain.
11-14
Use the area virtual-link message-digest-key command in Router Configuration
mode if you want to set an encrypted password for the OSPF virtual link:
MOT (config-ospf)#area {<0-4294967295> | <A.B.C.D>} virtual-link
<A.B.C.D> message-digest-key <1-255>
where:
0-4294967295 is the OSPF area IP address or number.
A.B.C.D is IP address associated with the OSPF area ID.
A.B.C.D is the router ID 32-bit IP address associated with the virtual link
neighbor.
1-255 is the OSPF MD5 Authentication Key ID number.
Use the show ip ospf virtual-links command in Privileged EXEC mode to
display information about the established virtual links:
MOT #show ip ospf virtual-links
Use the show ip ospf virtual links command in Privileged EXEC mode to
display the router ID of an OSPF router:
MOT #show ip ospf virtual-links
router ospf
network 72.0.0.0 0.255.255.255 area 72.0.0.0
area 72.0.0.0 virtual-link 72.4.5.6
router ospf
network72.0.0.0 0.255.255.255 area 72.0.0.0
area 72.0.0.0 virtual-link 72.5.6 message-digest-key 3 md5
tag3665dr53
MGBI
Release 1.0
526360-001-00 Rev. B