Static Routes Info View; Static Route Table - Motorola 68384 - Vanguard 320 Router User Manual

S P E C T R U M E n t e r p r i s e M a n a g e r
MTUsize
Specifies the Maximum Transmission Unit to be
used.
RIPSplitHorizon
Enables/disables the IP RIP split horizon.
RIFfield
Enables/disables the IP use of a RIF field in
Token Ring networks for ARPs and RIPs.
AdvtDefRte
Enables/disables advertising the default route of
0.0.0.0 on this interface.
AdvtNetworkRte
Enables/disables advertising directly-attached
networks and learned IP network routes on RIP
updates transmitted on this interface.
AdvtSubnetRte
Enables/disables the inclusion of all subnet
routes within RIP updates sent on this interface.
AdvtStatic/DirectRte
Enables/disables the inclusion of all statically
configured and directly connected routes within
RIP updates sent on this interface.

Static Routes Info View

Access: From the Icon Subviews menu for the
MotRouterApp Application icon, select Routing
Information.
This view contains the following three defined
areas:

• Static Route Table

• Dynamic Route Table
• RIP Information
Static Route Table
This area of the Static Routes Info view provides
configuration information about static routes
known to the device's routing function. Column
headings are as follows:
Index
Index number identifying a particular table entry.
IpNetwork
The IP address of a destination network or
subnetwork (Host addresses are not included in
the route table).
IpMask
The mask associated with the IP Network/Subnet
address. For example: if the destination is a
subnet of a class B network and the third byte of
43 of 95
M o t o r o l a V a n g u a r d D e v i c e s