Motorola BSR 2000 Configuration And Management Manual page 383

Release 1.0
Interface
Cable
Number of Hosts = 0
Interface
Cable
Number of Hosts = 0
Interface
Figure 6-22 show cable modem cpe Command Output
526360-001-00 Rev. B
NUM is the upstream port number.
Figure 6-22 displays typical cable modem cpe statistics command output
for each cable interface:
Prim Connect
Sid State
0/0/U1 1 online
Prim Connect
Sid State
0/0/U1 3 online
Prim Connect
Sid State
•
Use the show cable modem detail command in Privileged Exec mode to
display information for a SID assigned to a CM on a specific DOCSIS
interface:
MOT# show cable modem detail <X/Y> <NUM>
where:
X is 0.
Y is the port number.
NUM is the Service Identifier assigned to a CMs.
•
Use the show cable modem detail command in Privileged Exec mode to
display information for a specific modem connected to a specific interface:
MOT# show cable modem detail <MAC>
where:
MAC is the CM MAC address.
Timing Rec
Offset Power
1868 -.4
Timing Rec
Offset Power
1866 0.4
Timing Rec
Offset Power
MGBI
Configuring the CMTS
Ip Address
21.21.21.42
Ip Address
21.21.21.41
Ip Address
6-197