Motorola BSR 2000 Configuration And Management Manual page 135

Release 1.0
Command
snmp-server notify-filter
{<octet-string>} {<OID>}
{<octet-string> [included |
excluded] [nonvolatile |
volatile] [active |
not-in-service | <cr>]
526360-001-00 Rev. B
Table 4-1 snmp-server Commands (continued)
Description
Configure
snmpNotifyFilter
table.
MGBI
Configuring SNMP
Value
1. Specify the first
octet-string, which
specifies the
snmpNotifyFilter table
profile name (index #1).
2. Specify the
snmpNotifyFilter
subtree (index #2) OID,
which defines the family
of included and
excluded subtrees.
3. Specify the second
octet-string, which is the
snmpNotifyFilter mask
that combines with
snmpNotifyFilter
subtree to define the
family; the default is an
empty string.
4. Choose whether
subtrees are included or
excluded.
5. Choose whether the
message is stored in
nonvolatile and volatile.
6. Set the RowStatus to
active or not-in-service.
Default
Not
configured.
4-5