Motorola BSR 2000 Configuration And Management Manual page 108

BSR 2000 Configuration and Management Guide
Configuring Command Use Accounting
Configuring command use accounting provides resource usage data for commands
used at a specified privilege level. Use the aaa accounting commands default
command, in Global Configuration mode, to enable command use accounting, as
follows:
MOT
| sysadmin} default {none | start-stop | stop-only | wait-start} {local | none |
radius | tacacs}
where:
3-58
Configuring Terminal Session Accounting
# aaa accounting commands {exec | isp-ro | isp-rw | mso-ro | mso-rw
(config)
exec provides accounting for commands in the Privileged EXEC privilege level.
isp-ro provides accounting for commands in the ISP Read/Only privilege level.
isp-rw provides accounting for commands in the ISP Read/Write privilege level.
mso-ro provides accounting for commands in the MSO Read/Only privilege
level.
mso-rw provides accounting for commands in the MSO Read/Write privilege
level.
sysadmin provides accounting for commands in the SYSADMIN privilege level.
none disables accounting services.
start-stop sends a "start" accounting notice at the beginning of a process and a
"stop" accounting notice at the end of a process. The requested user process
begins regardless of whether the "start" accounting notice was received by the
accounting server.
stop-only sends a "stop" accounting notice at the end of the requested user
process. A "start" accounting request is not sent at the start of the process.
wait-start sends a "start" accounting notice at the beginning of a process and a
"stop" accounting notice at the end of a process. The requested user process does
not begin until the "start" accounting notice is received by the server.
local uses the local database as the accounting method.
none uses no method as the accounting method.
radius uses RADIUS as the accounting method.
MGBI
Release 1.0
526360-001-00 Rev. B