Displaying System Memory Information - Motorola BSR 2000 Configuration And Management Manual

BSR 2000 Configuration and Management Guide
Creator Id(Hex)
------- -------
tRootTask 8371c4
tTnetRDNtd 6ee8bc0
tTnetRDNtd 6ee8e68
tTnetRDNtd 6f5fd00
tRM_sm 6f9d230
tRM_sm 6fdaa60
tRM_sm 701da98
Figure 3-4 show process semaphores Command Output

Displaying System Memory Information

Follow these options to display BSR system information:
3-72
Use the show process semaphores command in Privileged EXEC mode display
information about the Semaphore ID number on which process is waiting:
MOT# show process semaphores
Figure 3-4 displays an example of the show process semaphores command
output:
Type Task-Queue #Pend State
---- ---------- ----- -----
BINARY FIFO
BINARY FIFO
BINARY FIFO
BINARY FIFO
MUTEX PRIORITY
MUTEX PRIORITY
MUTEX PRIORITY
Use the show memory information command in Privileged EXEC mode to
show the number of blocks of memory, the hexadecimal address of each block of
memory, and the size of each block of memory in bytes:
MOT# show memory information [brief] [ | {begin | exclude | include}
{<WORD>}]
where:
brief displays only the summary.
| turns on output modifiers (filters).
begin filters output that begins with the specified string.
exclude filters output that excludes the specified string.
include filters output that includes the specified string.
WORD is the specified string.
0 FULL
0 EMPTY
0 EMPTY
0 EMPTY
0 OWNER:NONE
0 OWNER:NONE
0 OWNER:NONE
MGBI
Release 1.0
Blocked-Task TIMEOUT
------------ -------
526360-001-00 Rev. B