Displaying Tacacs+ Information - Motorola BSR 2000 Configuration And Management Manual

Release 1.0
Configuring Terminal Session Accounting
Configuring terminal session accounting provides resource usage data for a specified
terminal session. Use the aaa accounting exec default command, in Global
Configuration mode, to enable privilege level authorization, as follows:
MOT
default {local | none | tacacs}
where:

Displaying TACACS+ Information

Use the show tacacs command to display statistics for all TACACS+ servers on the
network including the IP address of the servers, connections, failed connection
attempts, and packets sent and received. If there is more than one TACACS+ server
configured, the command output displays statistics for all servers in the order in which
they were configured.
MOT #show tacacs
Use the show tacacs statistics command to display overall TACACS+ statistics
including the total number of access (AAA) requests, the number of denied requests,
and the number of allowed requests.
526360-001-00 Rev. B
tacacs uses TACACS+ as the accounting method.
#aaa accounting exec {none | start-stop | stop-only | wait-start}
(config)
none disables accounting services.
start-stop sends a "start" accounting notice at the beginning of a process and a
"stop" accounting notice at the end of a process. The requested user process
begins regardless of whether the "start" accounting notice was received by the
accounting server.
stop-only sends a "stop" accounting notice at the end of the requested user
process. A "start" accounting request is not sent at the start of the process.
wait-start sends a "start" accounting notice at the beginning of a process and a
"stop" accounting notice at the end of a process. The requested user process does
not begin until the "start" accounting notice is received by the server.
local uses the local database as the accounting method.
none no method is specified as the accounting method.
tacacs uses TACACS+ as the accounting method.
MGBI
Configuring the System
3-59