Motorola BSR 2000 Configuration And Management Manual page 103

Release 1.0
Note: Specifying timeout or key parameters with the
command overrides any global values entered with the
tacacs-server
Specifying a Global Encryption Key
Use the tacacs-server key command to specify a global encryption key for all
communication between TACACS+ clients and TACACS servers. A global
encryption key is used if no encryption key is specifically configured for this
TACACS+ server. Use the tacacs-server key command, as follows:
MOT
where:
Specifying a Global Port Number
Use the tacacs-server port command to specify a global port number for all
communication between the TACACS+ server and the TACACS+ client. A global
port number is used if no port number is specifically configured for this TACACS+
server. Use the tacacs-server port command, as follows:
MOT
where:
Specifying a Global Retry Count
Use the tacacs-server retry command to change the global retry count which is the
number of times the TACACS+ client retries before moving on to the next configured
TACACS+ server. A global retry count is used if no retry count is specifically
configured for this TACACS+ server. Use the tacacs-server retry command, as
follows:
526360-001-00 Rev. B
timeout 1-1000 specifies a timeout value in seconds for this TACACS+ server.
The default value is 10.
retry, or
tacacs-server key <WORD>
(config)#
WORD specifies an alphanumeric authentication and encryption key. This key
must match the key used by the TACACS+ server.
tacacs-server port <0-65536>
(config)#
0-65536 specifies the global port number used for all communication between
TACACS+ clients and TACACS+ servers. The default port number is 49. If a
TACACS+ server is listening on any other port other than port 49, the port
number can be specified using this command.
tacacs-server timeout
MGBI
Configuring the System
tacacs-server host
tacacs-server
commands.
key,
3-53