Gathering Ospf Information; Displaying Ospf Routing Information; Displaying Network Information; Displaying Virtual Links - Motorola BSR 2000 Configuration And Management Manual

BSR 2000 Configuration and Management Guide
Note: A 32-bit mask (
address.

Gathering OSPF Information

There are several show commands that can be used to view and gather information
about your OSPF network. These show commands are available in all command
modes except for User EXEC mode, and most user access groups.
Use the following sections to gather information for your OSPF network:

Displaying OSPF Routing Information

Use the following sections to display OSPF routing information:

Displaying Network Information

Use the show ip ospf network command to display the IP network addresses,
wildcard masks, and the area numbers for all OSPF areas:
MOT# show ip ospf network
Figure 11-1
11-22
A.B.C.D is the subnetwork mask of the IP network, on which the interface is
associated.
255.255.255.255)
Displaying OSPF Routing Information
Displaying OSPF Memory Information
Displaying Network Information
Displaying Neighboring Routers

Displaying Virtual Links

displays typical show ip ospf network command output:
network 33.4.2.0 0.0.0.255 area 0
network 33.3.2.0 0.0.0.255 area 0
network 8.1.1.0 0.0.0.255 area 0
Figure 11-1 show ip ospf network Command Output
is permitted for a loopback IP
MGBI
Release 1.0
526360-001-00 Rev. B