Motorola BSR 2000 Configuration And Management Manual page 157

Release 1.0
snmp-server user user-name
snmp-server group group-name user user-name
Create
Group
Model
snmp-server access
group-name view-name
Associate
MIB View
to Group
SNMPv3
Figure 4-1 SNMP Access Level Configuration Process
1. Use the snmp-server community command in Global Configuration mode to
526360-001-00 Rev. B
Create
User
Model
Associate
User
Model
define a community access string to permit access using SNMPv1 and SNMPv2
to the SNMP Agent as shown below:
MOT (config)#snmp-server community <community-name> [ro | rw] [view
<view-name>] [<number>]
where:
community-name is the name of the SNMP community.
view-name is the name of the view.
number is the number of the access list.
snmp-server community community-name
snmp-server view view-name
Create
MIB
View
snmp-server community community-name view-name
Community Name
MGBI
Configuring SNMP
Create
Community
Name
Associate
MIB View to
SNMPv1/v2c
4-27