Scheduling The Removal Of A Spectrum Group Band - Motorola BSR 2000 Configuration And Management Manual

BSR 2000 Configuration and Management Guide
MOT(config-spcgrp: <WORD>)#no time {<day> | <hh:mm:ss>} band
{<5000000-42000000> <5000000-42000000>}
Note: When deleting the time for a band, ensure that the exact day,
hh:mm:ss, and start and end upstream frequencies are used.

Scheduling the Removal of a Spectrum Group Band

Follow these steps to schedule the removal of a spectrum group band:
1. Use the cable spectrum command in Global Configuration mode to enter Cable
Note: If a new removal time for a band is entered for a spectrum group, the
existing removal time for a band must be deleted first.
2. If you want to schedule the time when the spectrum group band is removed on a
6-140
where:
WORD is the spectrum group name.
day is the three letter abbreviation for day of the week
hh:mm:ss is the time during the day when the band is removed.
5000000-42000000 is the start upstream in Hertz.
5000000-42000000 is the end upstream frequency in Hertz.
Spectrum Group mode:
MOT(config)#cable spectrum <WORD>
where:
WORD is the spectrum group name.
The Cable Spectrum Group mode displays for the spectrum group.
daily basis, use the time delete band command in Cable Spectrum Group mode:
MOT(config-spcgrp: <WORD>)#time <hh:mm:ss> delete band
{<5000000-42000000> <5000000-42000000>}
MGBI
Release 1.0
526360-001-00 Rev. B